Putting the iom2 into Firmware Update Mode
From time to time, updates to the iom2 firmware may be required. We will offer specific instructions on how to do this when needed, but we wanted to show you how to put the iom2 into Firmware Update Mode.
With the device off, press and hold the button for quite a few seconds until the button light remains solid and the screen displays "FIRMWARE UPDATE".
How to get the iom2 out of Firmware Update Mode
If you accidentally put the iom2 into Firmware Update Mode, you can cancel this by performing a hard reset. In order to do this, simply put a pin in the small hole on the bottom of the device. This will reset the device and it will power back up normally.